Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSSAAB20009-3 CONVERTIBLE (9400) L4-2.0L TURBO (B205)REPAIR AND DIAGNOSISBODY AND FRAMESEATSMEMORY POSITIONING SYSTEMSTESTING AND INSPECTIONMANUAL OPERATION OF MEMORY FUNCTION SEAT NOT WORKING
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)
Manual Operation of Memory Function Seat Not Working
2000 Saab 9-3 Convertible (9400) L4-2.0L Turbo (B205)SECTION Manual Operation of Memory Function Seat Not Working
Fault symptoms
Manual operation does not work.
Probable cause of fault
Fault in lead or switch.
Diagnostic help
The switch positions can be read using the diagnostic tool.
Check the wiring
Jiggle the wiring harness in several places and in various directions to detect intermittent open circuits and short circuits in the wiring harness. Watch the multimeter, diagnostic tool and test lamp during the check.
See Seats/Testing and Inspection
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.