Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
1985 Renault 18I/Sportwagon L4-2165cc 2.2L
Maintenance: Labor Times
1985 Renault 18I/Sportwagon L4-2165cc 2.2LSECTION Labor Times
| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes | |
| Service or Charge | ||||
| 7500 Miles | 0.7 | 0.4 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 15, 000 Miles | 1.4 | 0.9 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 22, 500 Miles | 0.7 | 0.4 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 30, 000 Miles | 3.5 | 2.5 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| Note | ||||
| With Auto Trans, Add | 0.9 | 0.6 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 37, 500 Miles | 0.7 | 0.4 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
| 45, 000 Miles | 1.4 | 0.9 | C | For Procedure Information On Service Maintenance Schedules Refer To Appropriate Auto Repair/Tune-Up Manuals. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.