Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information
2008 Pontiac Grand Prix BaseSECTION Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information
Supplemental Inflatable Restraint Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| ADS A/D | - | Varies | The scan tool displays Volts. |
| ADS Monitoring | - | Present | The scan tool displays Present or Not Present. |
| Battery Voltage Signal | - | Varies | This displays volts. This is the voltage input supplied to the SDM. |
| Driver Seat Belt Switch | - | Unbuckled | The scan tool displays Buckled or Unbuckled. This is the state of the driver seat belt. |
| Driver Frontal Stage 1 Loop | - | Present | The scan tool displays Present or Not Present. |
| Driver Frontal Stage 2 Loop | - | Present | The scan tool displays Present or Not Present. |
| Driver Pretensioner Loop | - | Present | The scan tool displays Present or Not Present. |
| Driver Side Loop | - | Present | The scan tool displays Present or Not Present. |
| Passenger Presence System | - | Present | The scan tool displays Present or Not Present. |
| Passenger Pretensioner Loop | - | Present | The scan tool displays Present or Not Present. |
| Passenger Side Loop | - | Present | The scan tool displays Present or Not Present. |
| Psgr. Frontal Stage 1 Loop | - | Present | The scan tool displays Present or Not Present. |
| Psgr. Frontal Stage 2 Loop | - | Present | The scan tool displays Present or Not Present. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.