Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISGENERAL INFORMATIONOEM GENERAL INFORMATIONVEHICLE DIAGNOSTIC INFORMATIONSPECIFICATIONSDIGITAL RADIO RECEIVER SCAN TOOL INFORMATION
2008 Pontiac Grand Prix Base
Digital Radio Receiver Scan Tool Information
2008 Pontiac Grand Prix BaseSECTION Digital Radio Receiver Scan Tool Information
Digital Radio Receiver Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON / Engine OFF / Radio ON | |||
| Battery Voltage | - | Varies | This displays volts. This is the voltage input supplied to the digital radio receiver. |
| Ignition Counter | - | Varies | This displays the number of times the ignition has been cycled from the OFF to ON position. |
| Power Mode | - | Run | The scan tool displays Reserved, Off Battery Save, Off Asleep, Off Awake, Unlock, RAP Unlock, Accessory, Run, Crank, or RAP. The status of the vehicle power mode (ignition switch). |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.