Scan Tool Output Controls

2008 Pontiac Grand Prix BaseSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selection(s) Description
Lock All Doors Door Lock Test The BCM momentarily pulses all of the door lock motors. All doors should lock when ON is selected.
Driver Door Unlock Door Lock Test The BCM momentarily pulses only the driver door lock motor. The driver door should unlock when ON is selected.
Passenger Door Unlock Door Lock Test The BCM momentarily pulses all of the passenger door lock motors. All passenger doors should unlock when ON is selected.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.