Inflatable Restraint Sensing and Diagnostic Module (SDM)

2008 Pontiac Grand Prix BaseSECTION Inflatable Restraint Sensing and Diagnostic Module (SDM)
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: SDM Connector End View
GM744053Courtesy of GENERAL MOTORS CORP.
SDM Connector Part Information

Connector Part Information 
  • OEM: 15357038
  • Service: See Catalog
  • Description: 34-Way F Micro-Pack 100W Series Sealed (GY)
Terminal Part Information 
  • Pins: A1- A11, A13, A14, A16, B1- B8, C5- C8
  • Terminal/Tray: 15435885/20
  • Core/Insulation Crimp: W/W
  • Release Tool/Test Probe: 12122523/J-35616-6 (BN)
  • Pins: C1-C4
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
SDM Connector Terminal Identification

Pin Wire Color Circuit No. Function
A1 TN 3021 Steering Wheel Module - Stage 1 - High Control
A2 BN 3020 Steering Wheel Module - Stage 1 - Low Control
A3 OG 3024 I/P Module - Stage 1 - Low Control
A4 YE 3025 I/P Module - Stage 1 - High Control
A5 BK/WH 2118 Seat Belt Pretensioner - Left - High Control
A6 OG/BK 2119 Seat Belt Pretensioner - Left - Low Control
A7 OG 2117 Seat Belt Pretensioner - Right - Low Control
A8 L-GN 2116 Seat Belt Pretensioner - Right - High Control
A9 BK/WH 1751 Ground
A10 YE 1139 Ignition 1 Voltage
A11 D-BU 1128 SDM Class 2 Serial Data
A12 - - Not Used
A13 PK 2306 Occupant Sensor Serial Data Link
A14 BK/WH 238 Seat Belt Switch - Left
A15 - - Not Used
A16 RD 1362 Seat Belt Switch - Right - Signal
A17-A18 - - Not Used
B1 WH 3023 Steering Wheel Module - Stage 2 - High Control
B2 PK 3022 Steering Wheel Module - Stage 2 - Low Control
B3 PU 3026 I/P Module - Stage 2 - Low Control
B4 GY 3027 I/P Module - Stage 2 - High Control
B5 YE 2160 Front End Sensor Signal - Left
B6 GY 2260 Low Reference
B7 PU 2612 Low Reference
B8 WH/BK 2611 Front End Sensor Signal - Right Front
C1 BN 2137 Roof Rail Module - LF - High Control (AY1)
C2 YE/BK 2138 Roof Rail Module - LF - Low Control (AY1)
C3 L-GN 2136 Roof Rail Module - RF - Low Control (AY1)
C4 BK/WH 2135 Roof Rail Module - RF - High Control (AY1)
C5 YE 2131 Side Impact Sensing Module - Left - Voltage (AY1)
C6 WH 2132 Side Impact Sensing Module - Left - Signal (AY1)
C7 D-GN 2134 Side Impact Sensing Module - Right - Signal (AY1)
C8 TN 2133 Side Impact Sensing Module - Right - Voltage (AY1)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.