Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 6 (INTERIOR TRIM AND PANELING)
2008 Pontiac Grand Prix Base
Section 6 (Interior Trim And Paneling)
2008 Pontiac Grand Prix BaseSECTION Section 6 (Interior Trim And Paneling)
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Repair Instructions
- Door Inside Handle Bezel Replacement
- Front Side Door Inside Handle Bezel Replacement
- Rear Door Inside Handle Bezel Replacement
- Upper Extension Trim Panel Replacement
- Front Side Door Trim Panel Replacement
- Rear Side Door Trim Panel Replacement
- Front Side Door Water Deflector Replacement
- Rear Side Door Water Deflector Replacement
- Front Floor Kick-Up Panel Replacement
- Body Hinge Pillar Trim Panel Replacement
- Body Lock Pillar Trim Panel Replacement
- Front Side Door Sill Plate Replacement
- Rear Side Door Sill Plate Replacement
- Liftgate Door Sill Plate Replacement
- Front Assist Handle Replacement
- Roof Rail Rear Assist Handle Replacement
- Assist Handle and Rear Coat Hook Replacement
- Sunshade Replacement
- Sunshade Anchor Replacement
- Windshield Pillar Garnish Molding Replacement
- Center Pillar Upper Garnish Molding Replacement
- Rear Upper Garnish Molding Replacement
- Body Side Trim Panel Replacement - Left Side
- Body Side Trim Panel Replacement - Right Side
- Liftgate Pull Strap Replacement (SUV)
- Endgate Trim Panel Replacement (SUT)
- Liftgate Trim Panel Replacement (SUV)
- Rear Compartment Side Trim Replacement - Left Side
- Rear Compartment Side Trim Replacement - Right Side
- Midgate Hinge Finish Cover Replacement
- Endgate Center Molding Replacement (SUT)
- Lock Pillar Upper Garnish Molding Replacement
- Pressure Relief Valve Replacement (SUV)
- Special Tools and Equipment
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.