Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 465 (COMPONENT LOCATIONS)POWERTRAIN COMPONENT VIEWS
2008 Pontiac Grand Prix Base
Powertrain Component Views
2008 Pontiac Grand Prix BaseSECTION Powertrain Component Views
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Valve Cover - Right |
| 2 | Fuel Injector 5 |
| 3 | Intake Manifold |
| 4 | Fuel Injector 6 |
| 5 | Fuel Injector 4 |
| 6 | Fuel Injector 2 |
| 7 | Valve Cover - Left |
| 8 | Fuel Injector 1 |
| 9 | Fuel Injector 3 |
| Callout | Component Name |
|---|---|
| 1 | X107 |
| 2 | J121 |
| 3 | J120 |
| 4 | J110 |
| 5 | J119 |
| 6 | X109 |
| 7 | J103 |
| 8 | J131 |
| 9 | J133 |
| 10 | G131 |
| 11 | Engine Coolant Temperature (ECT) Sensor |
| 12 | Starter Solenoid |
| 13 | Starter |
| 14 | Engine Oil Pressure (EOP) Sensor |
| Callout | Component Name |
|---|---|
| 1 | Ignition Coil 2 |
| 2 | Ignition Coil 4 |
| 3 | Ignition Coil 6 |
| 4 | Engine Coolant Temperature (ECT) Sensor |
| 5 | Knock Sensor (KS) 2 |
| 6 | Engine Oil Level/Temperature Sensor |
| 7 | Engine Oil Pressure (EOP) Sensor |
| Callout | Component Name |
|---|---|
| 1 | Air Cleaner Assembly |
| 2 | Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor |
| 3 | Engine Block |
| Callout | Component Name |
|---|---|
| 1 | Electronic Control Module (ECM) X1 |
| 2 | Electronic Control Module (ECM) |
| 3 | Electronic Control Module (ECM) X2 |
| Callout | Component Name |
|---|---|
| 1 | Camshaft Position (CMP) Sensor - Exhaust Bank 1 |
| 2 | Camshaft Position (CMP) Actuator Solenoid - Exhaust Bank 1 |
| 3 | Camshaft Position (CMP) Actuator Solenoid - Intake Bank 1 |
| 4 | Camshaft Position (CMP) Sensor - Intake Bank 1 |
| 5 | Camshaft Position (CMP) Sensor - Intake Bank 2 |
| 6 | Camshaft Position (CMP) Actuator Solenoid - Intake Bank 2 |
| 7 | Camshaft Position (CMP) Actuator Solenoid - Exhaust Bank 2 |
| 8 | Camshaft Position (CMP) Sensor - Exhaust Bank 2 |
| Callout | Component Name |
|---|---|
| 1 | Ignition Coil 5 |
| 2 | Evaporative Emission (EVAP) Canister Purge Solenoid Valve |
| 3 | Ignition Coil 3 |
| 4 | Ignition Coil 1 |
| 5 | Throttle Body Assembly |
| 6 | Knock Sensor (KS) 1 |
| 7 | Crankshaft Position (CKP) Sensor |
| 8 | Engine Block Heater Assembly |
| Callout | Component Name |
|---|---|
| 1 | Heated Oxygen Sensor (HO2S) 1 |
| 2 | Engine Valve Cover |
| 3 | Exhaust Manifold |
| Callout | Component Name |
|---|---|
| 1 | Engine Coolant Temperature (ECT) Sensor |
| 2 | Ignition Coil 1 |
| 3 | Ignition Coil 3 |
| 4 | Ignition Coil 5 |
| 5 | Ignition Coil 7 |
| 6 | Manifold Absolute Pressure (MAP) Sensor |
| 7 | Throttle Actuator Control (TAC) Module |
| 8 | Engine Coolant Heater |
| 9 | Knock Sensor (KS) 1 |
| 10 | Engine Oil Level Switch |
| 11 | Camshaft Position (CMP) Sensor |
| Callout | Component Name |
|---|---|
| 1 | Transmission Control Module (TCM) |
| 2 | Air Cleaner Housing |
| 3 | Radiator Core Support |
| 4 | Engine Control Module (ECM) |
| Callout | Component Name |
|---|---|
| 1 | Throttle Actuator Control (TAC) Module |
| 2 | Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor |
| 3 | Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Connector |
| Callout | Component Name |
|---|---|
| 1 | Ignition Coil 8 |
| 2 | Fuel Injector 8 |
| 3 | Evaporative Emission (EVAP) Canister Purge Solenoid Valve |
| 4 | Manifold Absolute Pressure (MAP) Sensor |
| 5 | Throttle Actuator Control (TAC) Module |
| 6 | Engine Oil Pressure (EOP) Sensor |
| 7 | Fuel Injector 7 |
| 8 | Ignition Coil 7 |
| 9 | Fuel Injector 5 |
| 10 | Ignition Coil 5 |
| 11 | Fuel Injector 3 |
| 12 | Ignition Coil 3 |
| 13 | Fuel Injector 1 |
| 14 | Ignition Coil 1 |
| 15 | Fuel Injector 2 |
| 16 | Ignition Coil 2 |
| 17 | Fuel Injector 4 |
| 18 | Ignition Coil 4 |
| 19 | Fuel Injector 6 |
| 20 | Ignition Coil 6 |
| Callout | Component Name |
|---|---|
| 1 | Ignition Coil 7 |
| 2 | Throttle Actuator Control (TAC) Module |
| 3 | Ignition Coil 8 |
| 4 | Ignition Coil 6 |
| 5 | Ignition Coil 4 |
| 6 | Ignition Coil 2 |
| 7 | Heated Oxygen Sensor (HO2S) 1 |
| 8 | Knock Sensor (KS) 2 |
| 9 | Crankshaft Position (CKP) Sensor |
| 10 | Engine Oil Level Switch |
| 11 | Valve Lifter Oil Manifold (VLOM) Assembly |
| Callout | Component Name |
|---|---|
| 1 | Brake Booster Vacuum Sensor |
| 2 | Brake Booster |
| 3 | Brake Fluid Level Switch |
| Callout | Component Name |
|---|---|
| 1 | Manifold Absolute Pressure (MAP) Sensor |
| 2 | Throttle Actuator Control (TAC) Module |
| 3 | Engine Coolant Temperature (ECT) Sensor |
| 4 | Fuel Injector 5 |
| 5 | Fuel Injector 3 |
| 6 | Fuel Injector 1 |
| Callout | Component Name |
|---|---|
| 1 | Ignition Coil Module |
| 2 | Manifold Absolute Pressure (MAP) Sensor |
| 3 | Fuel Injector 1 |
| 4 | Fuel Injector 3 |
| 5 | Fuel Injector 5 |
| 6 | Exhaust Gas Recirculation (EGR) Valve |
| 7 | Throttle Actuator Control (TAC) Module |
| 8 | Engine Coolant Temperature (ECT) Sensor |
| 9 | Starter Solenoid |
| 10 | Starter |
| 11 | Engine Oil Level Switch |
| 12 | Knock Sensor (KS) 1 |
| Callout | Component Name |
|---|---|
| 1 | Exhaust Gas Recirculation (EGR) Valve |
| 2 | Manifold Absolute Pressure (MAP) Sensor |
| 3 | Throttle Actuator Control (TAC) Module |
| 4 | Ignition Coil Module |
| 5 | Crankshaft Position (CKP) Sensor |
| 6 | Engine Oil Pressure (EOP) Sensor |
| 7 | Camshaft Position (CMP) Sensor |
| 8 | Heated Oxygen Sensor (HO2S) 1 |
| Callout | Component Name |
|---|---|
| 1 | Exhaust Gas Recirculation (EGR) Valve |
| 2 | Heated Oxygen Sensor (HO2S) Sensor 1 |
| Callout | Component Name |
|---|---|
| 1 | Valve Cover |
| 2 | Secondary Air Injection (AIR) Pump |
| 3 | Starter |
| Callout | Component Name |
|---|---|
| 1 | Evaporative Emission (EVAP) Canister Purge Solenoid Valve |
| 2 | Throttle Actuator Control (TAC) Module |
| 3 | Exhaust Gas Recirculation (EGR) Valve |
| 4 | Fuel Injector 6 |
| 5 | Fuel Injector 4 |
| 6 | Fuel Injector 2 |
| 7 | Manifold Absolute Pressure (MAP) Sensor |
| 8 | Camshaft Position (CMP) Sensor |
| 9 | Engine Oil Pressure (EOP) Sensor |
| 10 | Knock Sensor (KS) 2 |
| 11 | Heated Oxygen Sensor (HO2S) 1 |
| Callout | Component Name |
|---|---|
| 1 | Intake Air Temperature (IAT) / Mass Air Flow (MAF) Sensor |
| 2 | Exhaust Gas Recirculation (EGR) Valve |
| 3 | Evaporative Emission (EVAP) Canister Purge Solenoid |
| Callout | Component Name |
|---|---|
| 1 | Exhaust Gas Recirculation (EGR) Valve |
| 2 | Fuel Injector 6 |
| 3 | Fuel Injector 4 |
| 4 | Fuel Injector 2 |
| 5 | Generator |
| 6 | Heated Oxygen Sensor (HO2S) Sensor 1 |
| Callout | Component Name |
|---|---|
| 1 | Exhaust Gas Recirculation (EGR) Valve |
| 2 | Intake Manifold |
| 3 | Valve Cover |
| 4 | Secondary Air Injection (AIR) Control Solenoid Valve/Pressure Sensor, Bank 2 (NU6) |
| Callout | Component Name |
|---|---|
| 10 | Vehicle Speed Sensor (VSS) Assembly |
| 315a | 1-2, 3-4 Shift Solenoid (SS) Valve Assembly |
| 315b | 2-3 Shift Solenoid (SS) Valve Assembly |
| 322 | Pressure Control (PC) Solenoid Valve Assembly |
| 334 | Torque Converter Clutch Pulse Width Modulation (TCC PWM) Solenoid Valve Assembly |
| 391 | Transmission Fluid Temperature (TFT) Sensor |
| 395 | Transmission Fluid Pressure (TFP) Manual Valve Position Switch Assembly |
| 440 | Automatic Transmission Input Shaft Speed (A/T ISS) Sensor Assembly |
| 811 | Lever Assembly-Manual Shaft Detent with Shift Position Switch - Internal Mode Switch (IMS) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.