Fastener Tightening Specifications

2008 Pontiac Grand Prix BaseSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Application Specifications
Metric English
Camshaft Position Sensor Bolt 12 N.m 106 lb in
Crankshaft Position Sensor Bolt 25 N.m 18 lb ft
Engine Coolant Temperature Sensor 20 N.m 15 lb ft
Evaporative Emission Canister Vent Valve Bracket Bolt 10 N.m 89 lb in
Fuel Fill Hose to Fuel Tank Clamp 2.5 N.m 22 lb in
Fuel Fill Pipe Bracket Bolt 13 N.m 115 lb in
Fuel Fill Pipe Clamp 2.5 N.m 22 lb in
Fuel Fill Pipe to Filler Pocket Screw 2.5 N.m 22 lb in
Fuel Rail Bolt 10 N.m 89 lb in
Fuel Tank Strap Bolt 48 N.m 35 lb ft
Heated Oxygen Sensor 42 N.m 31 lb ft
Ignition Coil Bolt 8 N.m 71 lb in
Knock Sensor 20 N.m 15 lb ft
Mass Air Flow/Intake Air Temperature Sensor Bolt 10 N.m 89 lb in
Throttle Body Bolt 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.