Vehicle Communication Interface Module (VCIM) X2

2008 Pontiac Grand Prix BaseSECTION Vehicle Communication Interface Module (VCIM) X2
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Vehicle Communication Interface Module (VCIM) X2 Connector End View
GM1471691Courtesy of GENERAL MOTORS CORP.
Vehicle Communication Interface Module (VCIM) X2

Pin Wire Circuit Function
1 0.35 OG/BK 1406 Left Audio Signal (+)
2 0.35 L-BU 1405 Audio Common Signal
3-5 - - Not Used
6 0.35 L-GN 2271 ADG Class 2 Serial Data
7 - - Not Used
8 0.35 BARE 2012 Drain Wire
9 0.35 GY 655 Cellular Microphone Signal
10 0.35 BARE 1705 Drain Wire
11-12 - - Not Used
Connector Part Information 
  • OEM: 15431365
  • Service: 88952886
  • Description: 12-Way F Micro 100A (WH)
Terminal Part Information 
  • Pins: 1, 2, 6, 8, 9, 10
  • Terminal/Tray: 15445905/23
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12180559/J-35616-6 (BN)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.