SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 417 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X1
2008 Pontiac Grand Prix Base

Body Control Module (BCM) X1

2008 Pontiac Grand Prix BaseSECTION Body Control Module (BCM) X1
WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X1 Connector End View
GM1243543Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X1

Pin Wire Circuit Function
1 0.35 BK 860 Front Windshield Wiper Switch High Signal
2 0.35 WH 1459 Security System Sensor Supply Voltage
3 0.35 PK 1439 Ignition 1 Voltage
4 0.35 BK 28 Horn Relay Control
5 - - Not Used
6 0.35 BK 707 RAP Relay Control
7 0.35 BK/WH 1969 Headlamp High Beam Relay Control
8 0.35 D-GN/WH 1317 Fog Lamp Relay Control (T96)
9 0.35 PK/WH 1970 Headlamp Module Voltage Supply
10 0.35 WH 1080 Park Lamp Relay Control
11 0.35 YE 749 Security Indicator Control
12 0.35 GY 91 Wiper Relay Control
13 0.35 YE 196 Windshield Wiper Motor Park Switch Signal
14 0.35 BK 1835 Security System Sensor Low Reference
15 0.35 L-GN/BK 1137 DRL Ambient Light Sensor Signal
16 0.35 L-GN 526 Stop Lamp Switch Signal
17 0.5 BK 1550 Ground
18 - - Not Used
19 0.5 BK/WH 151 Ground
20 0.8 BK 1650 Ground
21 0.35 YE 5 Crank Voltage
22 0.35 PK 1239 Ignition 1 Voltage
23 0.35 BN 1141 Ignition 3 Voltage
24 0.35 TN 185 Low Washer Fluid Indicator Signal
25 0.35 WH/BK 644 12-Volt Reference
26 0.35 PK/BK 109 Hood Ajar Switch Signal (AP3/AP8)
27 0.35 GY 598 10-Volt Reference
28 0.35 BK 552 Low Reference
29 0.35 BN/WH 230 I/P Dimming Return
30 0.35 PK 1444 I/P Dimming Signal
31 0.35 RD/WH 812 I/P Dimming Voltage Reference
32 - - Not Used
33 0.35 BN 5077 Low Reference
34 0.35 BN/WH 1571 Traction Control Switch Signal (U68, UH8)
35 0.5 GY/BK 1598 I/P Dimming Return
36 0.35 PK/BK 1597 Courtesy Lamps Switch On Signal
37 - - Not Used
38 0.35 L-GN 1037 BCM Class 2 Serial Data
39 0.5 WH 17 Stop Lamp Switch Signal
40 0.35 L-GN 80 Key In Ignition Switch Signal
41 0.5 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage
42 0.5 D-BU/WH 1315 Right Front Turn Signal Lamp Supply Voltage
43 0.8 GY/BK 690 Courtesy Lamp Supply Voltage
44 0.8 OG 1732 Inadvertent Power Courtesy Lamp
45 - - Not Used
46 0.8 OG 340 Battery Positive Voltage
47 0.5 RD 228 Windshield Washer Pump Control
48 0.8 GY 8 Instrument Panel Lamp Supply Voltage
49 0.35 D-GN/WH 1135 A/T Shift Lock Control Solenoid Supply Voltage
50 0.8 OG 240 Battery Positive Voltage
51 0.8 OG 2440 Battery Positive Voltage
52 0.8 OG 1240 Battery Positive Voltage
Connector Part Information 
  • OEM: 15448125
  • Service: 88956490
  • Description: 52-Way F (BK)
Terminal Part Information 
  • Pins: 32
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
  • Pins: 1-4, 6-16, 21-31, 34-38, 40, 17, 19, 20, 33, 39
  • Terminal/Tray: 638551-1/16
  • Core/Insulation Crimp: Pins 1-4, 6-16, 21-31, 34-38, 40 - J/J
  • Core/Insulation Crimp: Pins 17, 19, 20, 33, 39 - K/K
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
  • Pins: 41-52
  • Terminal/Tray: 1326030-6/17
  • Core/Insulation Crimp: Pins 41, 42, 47 - E/2
  • Core/Insulation Crimp: Pins 43, 44, 46, 48-52 - E/C
  • Release Tool/Test Probe: 12094429/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.