Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 406 (FRAME AND UNDERBODY)REPAIR INSTRUCTIONSENGINE SPLASH SHIELD REPLACEMENTREMOVAL PROCEDURE

2008 Pontiac Grand Prix Base

Removal Procedure

2008 Pontiac Grand Prix BaseSECTION Removal Procedure

WARNING: This page is about a different car, the 2008 Buick LaCrosse and 2008 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Engine Splash Shield & Retainers

Courtesy of GENERAL MOTORS CORP.

Remove the push-in retainers that hold the ABS lead to the engine splash shield.
Use the J 38778 in order to remove the push-in retainers from the engine splash shield.

Fig 2: Identifying Right Engine Splash Shield & Retainers

Courtesy of GENERAL MOTORS CORP.

Remove the engine splash shield from the lower flange of the engine compartment side rail.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.