Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Glass Breakage Sensor
2008 Pontiac Grand Prix BaseSECTION Glass Breakage Sensor
WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
| Pin | Wire Color | Function |
|---|---|---|
| 1 | RD/BK | Glass Breakage Sensor Supply Voltage |
| 2 | - | Not Used |
| 3 | BU | Theft Deterrent Module Signal |
| 4 | WH | Glass Breakage Sensor Microphone Signal |
| 5 | Braided | Drain Wire |
| 6 | WH/BK | Glass Breakage Sensor Ground |
| 7 | - | Not Used |
| 8 | BK/WH | Glass Breakage Sensor Supply Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.