SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 343 (FRAME AND UNDERBODY)SPECIFICATIONSDIMENSIONS - BODYREAR BODY DIMENSIONS
2008 Pontiac Grand Prix Base

Rear Body Dimensions

2008 Pontiac Grand Prix BaseSECTION Rear Body Dimensions
WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Body Dimensions
GM857679Courtesy of GENERAL MOTORS CORP.
Measurement Points Distance Between Control Points
2-14 1090 mm (42.91 in)
6-1 961 mm (37.83 in)
7-13 1631 mm (64.21 in)
11-4 1429 mm (56.26 in)
12-3 1262 mm (49.69 in)
10-7 1074 mm (42.28 in)
8-1 1204 mm (47.40 in)
13-10 1163 mm (45.79 in)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.