Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Connector Repairs: Notes
Connector Repairs contains a list of all connector repairs. The connector repairs are listed by the connector manufacturer and then by connector type. If the technician cannot identify the manufacturer of the connector, refer to Identifying Connectors below. Knowing the connector manufacturer will assist in finding the correct connector repair from the following list:
- Connector Position Assurance Locks
- Terminal Position Assurance Locks
- Bosch Connectors (0.64) or Bosch Connectors (2.8 JPT) or Bosch Connectors (BSK) or Bosch Connectors (ECM)
- Delphi Connectors (Micro .64) or Delphi Connectors (Micro-Pack 100W) or Delphi Connectors (Pull To Seat) or Delphi Connectors (Push To Seat) or Delphi Connectors (Weather Pack) or Delphi Connectors (12-Way)
- Tyco/AMP Connectors (025 Cap) or Tyco/AMP Connectors (CM 42-Way) or Tyco/AMP Connectors (Sensor) or Tyco/AMP Connectors (43-Way) or Tyco/AMP Connectors (Door Module)
- Yazaki Connectors (2-Way) or Yazaki Connectors (16-Way)
- Repairing Connector Terminals
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.