Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Junction Block - I/P C8
2008 Pontiac Grand Prix BaseSECTION Junction Block - I/P C8
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Junction Block - I/P C8 Connector Parts Information
Connector Part Information
|
Junction Block - I/P C8 Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| A | WH/BK | 2339 | Lower Left Air Temperature Sensor Signal |
| B | BN | 341 | Ignition 3 Voltage |
| BN | 341 | Ignition 3 Voltage | |
| C | BN | 341 | Ignition 3 Voltage |
| BN | 341 | Ignition 3 Voltage | |
| D | D-BU | 1646 | Right Air Temperature Door Position Signal |
| E | WH/BK | 1236 | Right Air Temperature Door Control |
| F | D-GN | 1614 | Recirculation Door Control |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.