Fuse Block - I/P C4

2008 Pontiac Grand Prix BaseSECTION Fuse Block - I/P C4
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fuse Block - I/P C4 Connector End View
GM1415717Courtesy of GENERAL MOTORS CORP.
Fuse Block - I/P C4 Connector Parts Information

Connector Part Information 
  • OEM: 15445949
  • Service: 89046826
  • Description: 12-Way F Metri-Pack 280 Series (BN)
Fuse Block - I/P C4 Connector Terminal Identification

Pin Wire Color Circuit No. Function
A - - Not Used
B BN 541 Ignition 3 Voltage
BN 541 Ignition 3 Voltage
C - - Not Used
D OG 3140 Battery Positive Voltage (Except SUT)
OG 3140 Battery Positive Voltage (Except SUT)
E TN 294 Door Lock Actuator Unlock Control
TN 294 Door Lock Actuator Unlock Control
F TN 294 Door Lock Actuator Unlock Control (Except SUT)
G OG 3040 Battery Positive Voltage (SUT)
H L-BU 1620 CHMSL Supply Voltage
J - - Not Used
K GY 295 Door Lock Actuator Lock Control
GY 295 Door Lock Actuator Lock Control
L - - Not Used
M OG 1240 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.