Fastener Tightening Specifications

2008 Pontiac Grand Prix BaseSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Brake Caliper Guide Pin Bolt 108 N.m 80 lb ft
Brake Caliper Mounting Bracket, Front 300 N.m 221 lb ft
Brake Caliper Mounting Bracket, Rear 165 N.m 122 lb ft
Brake Hose-to-Caliper Bolt 40 N.m 30 lb ft
Disc Brake Backing Plate Bolt 135 N.m 100 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.