SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 273 (COMPONENT LOCATIONS & CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSVIDEO DISPLAY
2008 Pontiac Grand Prix Base

Video Display

2008 Pontiac Grand Prix BaseSECTION Video Display
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Video Display Connector End View
GM1711011Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 7283-9088-30
  • Service: 89047355
  • Description: 10-Way F Kaizen 0.64 Series (BK)
Terminal Part Information 
  • Pins: 1, 2, 6, 7, 9-10
  • Terminal/Tray: 7116-4618-02
  • Core/Insulation Crimp: Pins 1, 2, 8-10 - P/P
  • Core/Insulation Crimp: Pins 6, 7 - 9/9
  • Release Tool/Test Probe: See Terminal Repair Kit
Pin Wire Circuit Function
1 0.35 D-GN 6975 DVD Video Signal (+)
2 0.35 WH/BK 5335 DVD Video Signal (-)
6 0.5 BK 2550 Ground
7 0.5 RD/WH 3240 Battery Positive Voltage
8 0.35 WH 7066 Remote Enable
9 0.35 PK/BK 5844 Video Bright Signal
10 0.35 L-GN/BK 5845 Video Mode Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.