Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Vehicle Communication Interface Module (VCIM) X1 (UE1)
2008 Pontiac Grand Prix BaseSECTION Vehicle Communication Interface Module (VCIM) X1 (UE1)
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
|
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 0.35 D-GN | 5060 | Low Speed GMLAN Serial Data |
| 2 | 0.35 BN/WH | 2517 | Keypad Red LED Signal |
| 3 | 0.35 YE/BK | 2516 | Keypad Green LED Signal |
| 4-5 | - | - | Not Used |
| 6 | 0.35 L-GN/BK | 2515 | Keypad Supply Voltage |
| 7 | 0.5 BK | 2550 | Ground |
| 8-9 | - | - | Not Used |
| 10 | 0.5 TN/BK | 2500 | High Speed GMLAN Serial Data Bus+ |
| 11 | 0.35 D-GN/WH | 2514 | Keypad Signal |
| 12 | 0.5 TN | 2501 | High Speed GMLAN Serial Data Bus- |
| 13-14 | - | - | Not Used |
| 15 | 0.5 RD/WH | 4640 | Battery Positive Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.