Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Transfer Case Shift Control Module X2
2008 Pontiac Grand Prix BaseSECTION Transfer Case Shift Control Module X2
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
|
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 2 | 0.5 TN/WH | 1554 | Encoder Low Reference |
| 3 | 0.5 BN/WH | 1555 | Channel P Encoder - Signal |
| 4 | 0.5 OG/WH | 1556 | Channel C Encoder - Signal |
| 5 | 0.5 YE/BK | 1558 | Channel B Encoder - Signal |
| 6 | 0.5 D-BU/WH | 1557 | Channel A Encoder - Signal |
| 10 | 0.35 L-BU | 1693 | Switch Signal |
| 11 | 0.35 GY | 6029 | 5-Volt Reference |
| 12 | 0.35 BN | 1560 | Neutral Indicator Control |
| 13 | 0.35 YE | 7115 | Differential Lock Indicator Control |
| 14 | 0.35 TN/BK | 1566 | 4 HI Indicator Control |
| 15 | 0.35 PU/WH | 1565 | 4 LO Indicator Control |
| 16 | 0.35 PK | 1561 | 4 WD Indicator Control |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.