SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 273 (COMPONENT LOCATIONS & CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSSTOP LAMP SWITCH
2008 Pontiac Grand Prix Base

Stop Lamp Switch

2008 Pontiac Grand Prix BaseSECTION Stop Lamp Switch
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Stop Lamp Switch Connector End View
GM1866237Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 15466671
  • Service: 19149301
  • Description: 4-Way F GT 280 Series (L-GY)
Terminal Part Information 
  • Pins: A-D
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Pin Wire Circuit Function
A 0.5 L-BU/WH 6311 TCC Brake Signal
B 0.5 PK 239 Ignition 1 Voltage
C 0.35 OG/WH 812 12-Volt Reference
C 0.35 OG/WH 812 12-Volt Reference
D 0.35 PU 7062 Brake Switch Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.