Passenger Door Module (PDM) X2

2008 Pontiac Grand Prix BaseSECTION Passenger Door Module (PDM) X2
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Passenger Door Module (PDM) X2 Connector End View
GM1664488Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 7283-9078-80
  • Service: See Catalog
  • Description: 16-Way F Kaizen 0.64 Series (BN)
Terminal Part Information 
  • Pins: 5, 7-11, 13, 15
  • Terminal/Tray: 7116-4618-02
  • Core/Insulation Crimp: Pins 5, 9, 10, 11, 13, 15 - P/P
  • Core/Insulation Crimp: Pins 7, 8 - 9/9
  • Release Tool/Test Probe: See Terminal Repair Kit
Pin Wire Circuit Function
1-4 - - Not Used
5 0.35 YE 5943 Ground
6 - - Not Used
7 0.5 TN 5946 Door Lock Actuator Lock Control
8 0.5 GY/BK 1663 Passenger Door Lock Actuator Unlock Control
9 0.35 D-GN 5060 Low Speed GMLAN Serial Data
10 0.35 L-BU 661 Right Courtesy Lamp Control
11 0.35 L-GN 1177 Right Front Door Open Switch Signal
12 - - Not Used
13 0.35 TN/WH 746 Right Front Door Ajar Switch Signal
14 - - Not Used
15 0.35 BK 1050 Ground
16 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.