SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 273 (COMPONENT LOCATIONS & CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSDRIVER DOOR MODULE (DDM) X2
2008 Pontiac Grand Prix Base

Driver Door Module (DDM) X2

2008 Pontiac Grand Prix BaseSECTION Driver Door Module (DDM) X2
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Door Module (DDM) X2 Connector End View
GM1664488Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: 7283-9078-80
  • Service: See Catalog
  • Description: 16-Way F Kaizen 0.64 Series (BN)
Terminal Part Information 
  • Pins: 2, 4, 5, 7, 8, 9-13, 15
  • Terminal/Tray: 7116-4618-02
  • Core/Insulation Crimp: Pins 2, 4, 5, 10-13, 15 - P/P
  • Core/Insulation Crimp: Pins 7, 8 - 9/9
  • Release Tool/Test Probe: See Terminal Repair Kit
Pin Wire Circuit Function
1 - - Not Used
2 0.35 PK 1691 Automatic Day/Night Mirror Low Reference
3 - - Not Used
4 0.35 L-GN 262 Driver Door Key Switch Signal
5 0.35 YE 5942 Driver Door Key Switch Signal
6 - - Not Used
7 0.5 TN 5925 Door Lock Actuator Lock Control
8 0.5 PU 5927 Door Lock Actuator Unlock Control
9 0.35 D-GN 5060 Low Speed GMLAN Serial Data
10 0.35 D-BU 660 Left Courtesy Lamp Control
11 0.35 TN 126 Left Front Door Open Switch Signal
12 0.35 GY 1690 Automatic Day/Night Mirror Signal
13 0.35 GY/BK 745 Left Front Door Ajar Switch Signal
14 - - Not Used
15 0.35 BK 1050 Ground
16 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.