Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Driver Door Module (DDM) X1
2008 Pontiac Grand Prix BaseSECTION Driver Door Module (DDM) X1
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
|
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 2 BN | 165 | Power Window Motor Left Front Down Control |
| 2 | 3 RD/WH | 1240 | Battery Positive Voltage |
| 3 | 2 D-BU | 164 | Power Window Motor Left Front Up Control |
| 4 | 0.8 RD/WH | 140 | Battery Positive Voltage |
| 5 | - | - | Not Used |
| 6 | 3 BK | 1850 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.