Body Control Module (BCM) X7

2008 Pontiac Grand Prix BaseSECTION Body Control Module (BCM) X7
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X7 Connector End View
GM1664505Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: HITPB-28-G-H
  • Service: -
  • Description: 28-Way F HIT Series (GY)
Terminal Part Information 
  • Pins: 7, 9, 18, 19, 21, 26-28
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
Pin Wire Circuit Function
1-6 - - Not Used
7 0.35 L-BU 195 Rear Door Lock Switch Signal
8 - - Not Used
9 0.35 WH 194 Door Unlock Control
10-17 - - Not Used
18 0.35 L-GN 170 Power Window Master Switch Right Rear Up Signal
19 0.35 PU 169 Power Window Master Switch Left Rear Down Signal
20 - - Not Used
21 0.35 D-BU 1307 Power Window Master Switch Lockout Signal
22-25 - - Not Used
26 0.35 PU 171 Power Window Master Switch Right Rear Down Signal
27 0.35 L-BU/WH 280 Power Window Master Switch Lockout Right Rear Signal
28 0.35 D-GN 168 Power Window Master Switch Left Rear Up Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.