SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 273 (COMPONENT LOCATIONS & CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) X6
2008 Pontiac Grand Prix Base

Body Control Module (BCM) X6

2008 Pontiac Grand Prix BaseSECTION Body Control Module (BCM) X6
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X6 Connector End View
GM1664502Courtesy of GENERAL MOTORS CORP.
Connector Part Information 
  • OEM: HITPB-25-F-PK
  • Service: -
  • Description: 25-Way F HIT Series (PK)
Terminal Part Information 
  • Pins: 2
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: 12, 14, 15, 21
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 15315247/J-35616-64B (L-BU)
  • Pins: 12
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Pin Wire Circuit Function
1 - - Not Used
2 1 L-BU 20 Stop Lamp Supply Voltage
3-11 - - Not Used
12 0.35 PK/BK 1303 Midgate Ajar Indicator Signal (SUV)
12 0.35 PK/BK 1303 Midgate Ajar Indicator Signal (SUT)
13 - - Not Used
14 0.35 L-GN/BK 748 Right Rear Door Ajar Switch Signal
15 0.35 L-BU/BK 747 Left Rear Door Ajar Switch Signal
16-20 - - Not Used
21 0.35 YE 6817 LED Dimming Supply
22-25 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.