Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 269 (FRONT DRIVE AXLE)COMPONENT LOCATORFRONT DRIVE AXLE DISASSEMBLED VIEWS
2008 Pontiac Grand Prix Base
Front Drive Axle Disassembled Views
2008 Pontiac Grand Prix BaseSECTION Front Drive Axle Disassembled Views
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Front Drive Axle Inner Shaft |
| 2 | Front Drive Axle Inner Shaft Retaining Ring |
| 3 | Front Drive Axle Inner Shaft Seal |
| 4 | Front Drive Axle Inner Shaft Bearing |
| 5 | Front Drive Axle Inner Shaft Housing |
| 6 | Front Drive Axle Housing Bracket Bushing |
| 7 | Front Drive Axle Inner Shaft Housing Bolt |
| 8 | Front Differential Carrier Case Bolt |
| 9 | Front Differential Carrier Case Half |
| 10 | Front Differential Bearing Adjuster Lock Pin |
| 11 | Front Differential Bearing Adjuster Nut and Sleeve |
| 12 | Front Differential Case Side Bearing Cup |
| 13 | Front Differential Case Side Bearing |
| 14 | Front Differential Ring Gear Bolt |
| 15 | Front Differential Pinion Gear Shaft |
| 16 | Front Differential Case |
| 17 | Differential Pinion Gear Shaft Lock Bolt |
| 18 | Differential Pinion Gear Thrust Washer |
| 19 | Differential Pinion Gear |
| 20 | Differential Side Gear Thrust Washer |
| 21 | Differential Side Gear |
| 22 | Front Differential Side Gear Spacer |
| 23 | Differential Pinion Gear Thrust Washer |
| 24 | Differential Pinion Gear |
| 25 | Front Differential Side Gear Spacer |
| 26 | Differential Side Gear |
| 27 | Differential Side Gear Thrust Washer |
| 28 | Front Differential Ring Gear |
| 29 | Front Differential Case Side Bearing |
| 30 | Front Differential Side Gear Bearing Cup |
| 31 | Front Differential Case Half Lock Pin |
| 32 | Front Differential Case Half Lock Pin |
| 33 | Front Differential Carrier Case Half |
| 34 | Front Differential Carrier Bushing |
| 35 | Front Differential Drive Pinion Gear |
| 36 | Front Differential Drive Pinion Gear Inner Bearing Shim |
| 37 | Front Differential Drive Pinion Inner Bearing |
| 38 | Front Differential Drive Pinion Inner Bearing Cup |
| 39 | Front Differential Drive Pinion Gear Bearing Spacer |
| 40 | Front Differential Drive Pinion Gear Outer Bearing Cup |
| 41 | Front Differential Drive Pinion Gear Outer Bearing |
| 42 | Front Differential Drive Pinion Bearing Gear Oil Seal |
| 43 | Front Differential Drive Pinion Bearing Gear Yoke |
| 44 | Front Differential Drive Pinion Bearing Gear Yoke Washer |
| 45 | Front Differential Drive Pinion Bearing Gear Yoke Nut |
| 46 | Front Differential Carrier Oil Drain Plug Washer |
| 47 | Front Differential Carrier Oil Drain Plug |
| 48 | Front Differential Carrier Oil Fill Plug Washer |
| 49 | Front Differential Carrier Oil Fill Plug |
| 50 | Front Differential Carrier Hole Plug |
| 51 | Front Differential Bearing Adjuster and O-Ring Seal |
| 52 | Front Differential Bearing Adjuster Nut Lock |
| 53 | Bolt |
| 54 | Front Drive Axle Inner Shaft Bearing |
| 55 | Front Drive Axle Inner Shaft Bearing |
| 56 | Front Drive Axle Inner Shaft Retaining Ring |
| 57 | Front Drive Axle Inner Shaft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.