SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 252 (FIXED AND MOVEABLE WINDOWS)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Pontiac Grand Prix Base

Fastener Tightening Specifications

2008 Pontiac Grand Prix BaseSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Front Door Window Run Channel Bolts 0.675 N.m 6 lb in
Front Door Window Stabilizer Bolts 9 N.m 6 lb ft
Front Window Outer Sealing Strip Screw 9 N.m 6 lb ft
Midgate Window Regulator Nuts 5 N.m 44 lb in
Midgate Window Run Channel Screws 25 N.m 18 lb ft
Power Window Regulator Motor 10 N.m 89 lb in
Rear Door Window Run Channel Bolts 6 N.m 53 lb in
Window Regulator Bolts 9 N.m 6 lb ft
Window Regulator Clamp Bolts 9 N.m 6 lb ft
Window to Midgate Regulator Lower Nuts 9 N.m 6 lb ft
Windshield Side Reval Molding 2 N.m 18 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.