Scan Tool Data List

2008 Pontiac Grand Prix BaseSECTION Scan Tool Data List
WARNING: This page is about a different car, the 2007 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Ignition ON, engine OFF, brake fluid level normal, and park brake released.
Low Brake Fluid Level Data OK/Low OK
Brake Lamp Inputs for Analog Dash Off/On Off
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.