Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 172 (GENERAL INFORMATION)INTRODUCTIONUS ENGLISH/METRIC CONVERSION
2008 Pontiac Grand Prix Base
US English/Metric Conversion
2008 Pontiac Grand Prix BaseSECTION US English/Metric Conversion
WARNING: This page is about a different car, the 2007 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
US English/Metric Conversion
| English | Multiply/ Divide by | Metric |
|---|---|---|
| In order to calculate English measurement, divide by the number in the center column. In order to calculate metric measurement, multiply by the number in the center column. |
||
| Length | ||
| in | 25.4 | mm |
| ft | 0.3048 | m |
| yd | 0.9144 | |
| mi | 1.609 | km |
| Area | ||
| sq in | 645.2 | sq mm |
| 6.45 | sq cm | |
| sq ft | 0.0929 | sq m |
| sq yd | 0.8361 | |
| Volume | ||
| cu in | 16,387.0 | cu mm |
| 16.387 | cu cm | |
| 0.0164 | L | |
| qt | 0.9464 | |
| gal | 3.7854 | |
| cu yd | 0.764 | cu m |
| Mass | ||
| lb | 0.4536 | kg |
| ton | 907.18 | |
| 0.907 | tonne (t) | |
| Force | ||
| kg F | 9.807 | newtons (N) |
| oz F | 0.2780 | |
| lb F | 4.448 | |
| Acceleration | ||
| ft/s2 | 0.3048 | m/s2 |
| in/s2 | 0.0254 | |
| Torque | ||
| lb in | 0.11298 | N.m |
| lb ft | 1.3558 | |
| Power | ||
| hp | 0.745 | kW |
| Pressure (Stress) | ||
| inches of H2O | 0.2488 | kPa |
| lb/sq in | 6.895 | |
| Energy (Work) | ||
| Btu | 1055.0 | J (J= one Ws) |
| lb ft | 1.3558 | |
| kW hour | 3,600,000.0 | |
| Light | ||
| Foot Candle | 10.764 | lm/m2 |
| Velocity | ||
| mph | 1.6093 | km/h |
| Temperature | ||
| (°F - 32) 5/9 | = | °C |
| °F | = | (9/5 °C + 32) |
| Fuel Performance | ||
| 235.215/mpg | = | 100 km/L |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.