SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 169 (FIXED & MOVEABLE WINDOW SYSTEMS)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Pontiac Grand Prix Base

Fastener Tightening Specifications

2008 Pontiac Grand Prix BaseSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Front Door Outer Belt Sealing Strip Screws 2 N.m 18 lb in
Front Door Window Channel Retaining Screws 2 N.m 18 lb in
Rear Door Frame Applique/Runchannel Screws 2 N.m 18 lb in
Rear Door Outer Belt Sealing Strip Screws 2 N.m 18 lb in
Rear Stationary Window Lower Bolt 10 N.m 89 lb in
Rear Window Channel Retainer Screws 2 N.m 18 lb in
Window Guide Channel to Window Bolt 10 N.m 89 lb in
Window Regulator Bolts 10 N.m 89 lb in
Window Regulator Motor Bolts 6 N.m 53 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.