Scan Tool Data List

2008 Pontiac Grand Prix BaseSECTION Scan Tool Data List
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, Engine OFF
Left Rear Door Ajar Switch Inputs Closed/Ajar Closed
LF Door Ajar Switch Inputs Door Closed/Ajar Door Closed
LF Key Cylinder Lock Switch Inputs Idle/Lock/Unlock/Invalid Idle
Right Rear Door Ajar Switch Inputs Closed/Ajar Closed
RF Door Ajar Switch Inputs Door Closed/Ajar Door Closed
RF Key Cylinder Lock Switch Inputs Idle/Lock/Unlock/Invalid Idle
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.