Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 149 (THEFT DETERRENT SYSTEM)COMPONENT LOCATORTHEFT DETERRENT SYSTEM COMPONENT VIEWS
2008 Pontiac Grand Prix Base
Theft Deterrent System Component Views
2008 Pontiac Grand Prix BaseSECTION Theft Deterrent System Component Views
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Lamp Switch Assembly - Fog Lamp |
| 2 | Instrument Panel Cluster (IPC) |
| 3 | Ignition Switch |
| 4 | Air Temperature Sensor - Inside |
| 5 | Sunload Sensor Assembly (CJ2) or Ambient Light Sensor (C67) |
| 6 | Theft LED |
| 7 | Driver Information Center (DIC) |
| 8 | Radio |
| 9 | HVAC Control Module |
| 10 | Heated Seat Switch - Front Passenger |
| 11 | Cigar Lighter |
| 12 | Heated Seat Switch - Driver |
| 13 | Steering Wheel Controls - Right |
| 14 | Cruise Control Switch |
| 15 | Voice Recorder / Cruise Switch Assembly |
| 16 | Steering Wheel Controls - Left |
| 17 | Turn Signal / Multifunction Switch |
| 18 | I/P Dimmer Switch |
| 19 | Lamp Switch Assembly - Interior Lamps |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.