Fastener Tightening Specifications

2008 Pontiac Grand Prix BaseSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Buick LaCrosse and 2007 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Anchor Plate Nut 42 N.m 31 lb ft
Center Seat Belt Buckle Bolt 42 N.m 31 lb ft
Child Restraint Tether Outer Hardware Bolt 20 N.m 15 lb ft
Front Seat Belt Retractor Bolt 68 N.m 50 lb ft
Guide Loop Nut 42 N.m 31 lb ft
Intermediate Guide Bolts 10 N.m 89 lb in
Rear Seat Belt Retractor Bolt 68 N.m 50 lb ft
Rear Seat Center Belt Nuts 42 N.m 31 lb ft
Shoulder Belt Guide Adjuster Bracket Bolts 42 N.m 31 lb ft
Side Belt Retractor Bolt 42 N.m 31 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.