Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Inflatable Restraint I/P Module Disable Switch Indicator
The instrument panel (I/P) module disable switch ON/OFF indicator is an LED located in a position that can be viewed by the occupants in the front seats. The location varies depending on the vehicle. When the I/P module disable switch is in the disable position, the I/P module disable switch indicator illuminates. When the I/P module disable switch is in the enable position, the I/P module disable switch indicator is not illuminated. The I/P module disable switch indicator will dim to a lower intensity when the headlamp switch is turned ON.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.