Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Inflatable Restraint I/P Module Disable Switch
2008 Pontiac Grand Prix BaseSECTION Inflatable Restraint I/P Module Disable Switch
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Inflatable Restraint I/P Module Disable Switch Connector Parts Information
Connector Part Information
|
Inflatable Restraint I/P Module Disable Switch Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| A | TN/BK | 371 | I/P Module Disable Switch - Signal |
| B | YE | 1139 | Ignition 1 Voltage |
| C | BN | 2409 | Interior Park Lamps Supply Voltage |
| D | BN/WH | 230 | Instrument Panel Lamps Dimming Control |
| E | PK | 353 | I/P Module Suppression Indicator Control |
| F | BK | 1050 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.