Removal Procedure

2008 Pontiac Grand Prix BaseSECTION Removal Procedure
    Fig 1: Remote Control Door Lock Receiver
    GM1357199Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement .
  2. Reposition the sound barrier for access.
  3. Disengage the receiver retainers.
  4. Disconnect the electrical connector.
  5. Remove the receiver.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.