SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2008GRAND PRIX BASEREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESPROGRAMMING AND SETUP - ALL SYSTEMSREPAIR INSTRUCTIONSREMOTE CONTROL DOOR LOCK RECEIVER PROGRAMMING AND SETUPREMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT
2008 Pontiac Grand Prix Base

Remote Control Door Lock Receiver Replacement

2008 Pontiac Grand Prix BaseSECTION Remote Control Door Lock Receiver Replacement

If the remote control door lock receiver is replaced, the following procedures must be performed:

  1. Keyless Entry Transmitter Programming - Refer to Transmitter Programming .
  2. Tire Type Setup:
    1. Install a scan tool
    2. Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
    3. Select Tire Type/Pressure Selection.
    4. Follow the on-screen instructions.
  3. Tire Pressure Monitoring Sensor Learn - Refer to Tire Pressure Sensor Learn .
  4. RCDLR Setup:
    1. Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
    2. Select Setup New RCDLR.
    3. Follow the on-screen instructions.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.