Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1998FIREBIRD V8-5.7L VIN GREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSTRANSMISSION AND DRIVETRAINMANUAL TRANSMISSION/TRANSAXLESYSTEM SPECIFICATIONSTRANSMISSION/TRANSAXLE SPECIFICATIONSUNIT REPAIRFASTENER TIGHTENING SPECIFICATIONS
1998 Pontiac Firebird V8-5.7L VIN G
Fastener Tightening Specifications
1998 Pontiac Firebird V8-5.7L VIN GSECTION Fastener Tightening Specifications
Adapter Plate Plug 27 Nm (20 lb ft)
Adapter Plate to Transmission Case Bolts 35 Nm (26 lb ft)
Backup Lamp Switch 27 Nm (20 lb ft)
Clutch Fork Bolt 25 Nm (18 lb ft)
Clutch Housing to Adapter Plate Bolt 35 Nm (26 lb ft)
Computer Aided Gear Select Solenoid 40 Nm (30 lb ft)
Cover Plate Bolts 20 Nm (15 lb ft)
Extension Housing Plug 27 Nm (20 lb ft)
Exension Housing to Transmission Case Bolts 35 Nm (26 lb ft)
Reverse Idler Shaft Bracket Bolts 25 Nm (18 lb ft)
Reverse Lockout Assembly Bolt 18 Nm (13 lb ft)
Reverse Lockout Solenoid 40 Nm (30 lb ft)
Shifter Bolts 20 Nm (15 lb ft)
Shift Detent Assembly 40 Nm (30 lb ft)
Shift Lever Guide Bolts 27 Nm (20 lb ft)
Shift Guide Plate Bolts 22 Nm (16 lb ft)
Transmission Case Drain Plug 18 Nm (13 lb ft)
Transmission Case Fill Plug 18 Nm (13 lb ft)
Vehicle Speed Sensor Bolt 10 Nm (89 lb in)
Adapter Plate to Transmission Case Bolts 35 Nm (26 lb ft)
Backup Lamp Switch 27 Nm (20 lb ft)
Clutch Fork Bolt 25 Nm (18 lb ft)
Clutch Housing to Adapter Plate Bolt 35 Nm (26 lb ft)
Computer Aided Gear Select Solenoid 40 Nm (30 lb ft)
Cover Plate Bolts 20 Nm (15 lb ft)
Extension Housing Plug 27 Nm (20 lb ft)
Exension Housing to Transmission Case Bolts 35 Nm (26 lb ft)
Reverse Idler Shaft Bracket Bolts 25 Nm (18 lb ft)
Reverse Lockout Assembly Bolt 18 Nm (13 lb ft)
Reverse Lockout Solenoid 40 Nm (30 lb ft)
Shifter Bolts 20 Nm (15 lb ft)
Shift Detent Assembly 40 Nm (30 lb ft)
Shift Lever Guide Bolts 27 Nm (20 lb ft)
Shift Guide Plate Bolts 22 Nm (16 lb ft)
Transmission Case Drain Plug 18 Nm (13 lb ft)
Transmission Case Fill Plug 18 Nm (13 lb ft)
Vehicle Speed Sensor Bolt 10 Nm (89 lb in)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.