Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC1998FIREBIRD V8-5.7L VIN GREPAIR AND DIAGNOSISCRUISE CONTROLCRUISE CONTROL SWITCHADJUSTMENTS
1998 Pontiac Firebird V8-5.7L VIN G
Cruise Control Switch: Adjustments
1998 Pontiac Firebird V8-5.7L VIN GSECTION Adjustments
Adjust the release switch (1) at the same time the stoplamp and torque converter clutch (TCC) is adjusted.
Use the following procedure in order to adjust the cruise control switch:
1. Depress the brake pedal or the clutch pedal. Insert the switch into the pedal bracket until the retainer is fully seated on the switch:
1.1. The release switch (1)
1.2. The stoplamp and TCC switch
1.3. The clutch switch or the clutch anticipate switch
2. Slowly pull the brake or clutch pedal rearward with a force of 222 N.m (50 lb) until click sounds are not heard.
The switch retainers will be in their original positions.
3. Ensure that the following contacts open at 25.4 mm (1 in) or less of pedal travel:
3.1. The release switch (1)
3.2. The stoplamp and TCC switch
4. Ensure that the switches open simultaneously or before the onset of braking.
The brake pedal may travel up to 25.4 mm (1 in) before the cruise control system disengages.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.