SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH2000BREEZE 2.0 C, STANDARD, T350REPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESBODY CONTROL MODULES - EXCEPT COUPEPROGRAMMINGSKIM MODULEINITIALIZATION PROCEDURE
2000 Plymouth Breeze 2.0 C, Standard, T350

Initialization Procedure

2000 Plymouth Breeze 2.0 C, Standard, T350SECTION Initialization Procedure
  1. Obtain vehicle's unique PIN number assigned to it's original SKIM module from vehicle owner or Chrysler's customer center.
  2. Using scan tool, select THEFT ALARM, SKIM, then MISCELLANEOUS. Select SKIM MODULE REPLACED function.
  3. Enter SECURED ACCESS mode using unique 4-digit PIN number.
  4. Program vehicle's VIN number into SKIM's memory.
  5. Program country code into SKIM's memory (U.S.).
  6. Transfer vehicle's unique Secret Key data from PCM. This process will require SKIM module to be in SECURED ACCESS mode. The PIN number must be entered into scan tool before SKIM will enter SECURED ACCESS mode. Once SECURED ACCESS mode is active, SKIM will remain in that mode for 60 seconds.
  7. Program all customer keys into SKIM's memory. This requires that SKIM be in SECURED ACCESS mode. The SKIM will immediately exit SECURED ACCESS mode after each key is programmed.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.