Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1993LASER FWD L4-1753CC 1.8L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSIGNITION SYSTEMSYSTEM SPECIFICATIONS
1993 Plymouth Laser FWD L4-1753cc 1.8L SOHC
System Specifications
1993 Plymouth Laser FWD L4-1753cc 1.8L SOHCSECTION System Specifications
FIRING ORDER 1-3-4-2
SPARK PLUG GAP
STANDARD VALUE .039 - .043 in (1.0 - 1.1 mm)
TORQUE SPECIFICATIONS
DISTRIBUTOR MOUNTING NUT 7 - 8 ft lb (10 - 12 Nm)
IGNITION COIL MOUNTING BOLTS 9 - 10 ft lb (12 - 15 Nm)
SPARK PLUGS 15 - 21 ft lb (20 - 30 Nm)
SPARK PLUG GAP
STANDARD VALUE .039 - .043 in (1.0 - 1.1 mm)
TORQUE SPECIFICATIONS
DISTRIBUTOR MOUNTING NUT 7 - 8 ft lb (10 - 12 Nm)
IGNITION COIL MOUNTING BOLTS 9 - 10 ft lb (12 - 15 Nm)
SPARK PLUGS 15 - 21 ft lb (20 - 30 Nm)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.