Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPLYMOUTH1985HORIZON L4-135 2.2L SOHCREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSENGINE CONTROL MODULETECHNICAL SERVICE BULLETINSCUSTOMER INTERESTFUEL SYSTEM - VAPOR LOCK/ FUEL FOAMINGOVERVIEW
1985 Plymouth Horizon L4-135 2.2L SOHC
Fuel System - Vapor Lock/ Fuel Foaming: Overview
1985 Plymouth Horizon L4-135 2.2L SOHCSECTION Overview
86chrysler7
Models
1981 Through 1987 Omni/Horizon/ Charger/Turismo, Scamp & Rampage Vehicles (Includes Shelby & G.L.H. Models) Equipped With a 2.2L Carbureted Engine
Subject
Vapor Lock/ Fuel Foaming
Index
DRIVEABILITY
Date
November 24, 1986
No.
18-24-86 REVISION A
P-4239
This bulletin supersedes Technical Service Bulletins:
^ 14-48-84 for subject vehicles equipped with 2.2L engine.
^ 18-24-86, which should be removed from your files.
^ 18-24-86 SUPPLEMENT A, which should be removed from your files.
The model year application has been expanded to include 1981 through 1987 vehicles, as indicated in Technical Service Bulletin 18-24-86 SUPPLEMENT A, and to include later-built 1987 vehicles with a pressure regulator located near the carburetor fuel inlet.
Models
1981 Through 1987 Omni/Horizon/ Charger/Turismo, Scamp & Rampage Vehicles (Includes Shelby & G.L.H. Models) Equipped With a 2.2L Carbureted Engine
Subject
Vapor Lock/ Fuel Foaming
Index
DRIVEABILITY
Date
November 24, 1986
No.
18-24-86 REVISION A
P-4239
This bulletin supersedes Technical Service Bulletins:
^ 14-48-84 for subject vehicles equipped with 2.2L engine.
^ 18-24-86, which should be removed from your files.
^ 18-24-86 SUPPLEMENT A, which should be removed from your files.
The model year application has been expanded to include 1981 through 1987 vehicles, as indicated in Technical Service Bulletin 18-24-86 SUPPLEMENT A, and to include later-built 1987 vehicles with a pressure regulator located near the carburetor fuel inlet.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.