Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 955 (BODY FRONT END)SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Section 955 (Body Front End): Specifications
2004 Oldsmobile Bravada RWDSECTION Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Inlet Grille Panel Screws | 1.5 N.m | 13 lb in |
| Cowl Plenum Seal Screws | 1.9 N.m | 17 lb in |
| Fascia to the Two Center Support Screws | 20 N.m | 15 lb ft |
| Fender to the Cowl Bolts | 29 N.m | 21 lb ft |
| Fender to the Door Frame Bolts | 29 N.m | 21 lb ft |
| Fender to the Door Hinge Bolts | 29 N.m | 21 lb ft |
| Fender to the Radiator Support Bolts | 29 N.m | 21 lb ft |
| Fender to the Reinforcement Bolts | 29 N.m | 21 lb ft |
| Fender to the Wheelhouse Bolts | 29 N.m | 21 lb ft |
| Fog Lamp Bolts | 9 N.m | 80 lb in |
| Grille Guard Bolts | 45 N.m | 33 lb ft |
| Hood Hinge Attaching Bolts and Nuts | 25 N.m | 18 lb ft |
| Hood Release Cable and the Lever Mounting Bolts | 9 N.m | 80 lb in |
| Primary Hood Latch Mounting Bolts | 25 N.m | 18 lb ft |
| Primary Hood Latch Mounting Bracket Bolts | 25 N.m | 18 lb ft |
| Primary Hood Latch Support Bracket Mounting Bolts | 25 N.m | 18 lb ft |
| Radiator Support to Frame Mount Bolts | 70 N.m | 52 lb ft |
| Secondary Hood Latch Assembly Mounting Bolts | 25 N.m | 18 lb ft |
| Wheelhouse Panel to Fender Bolts | 29 N.m | 21 lb ft |
| Wheelhouse Panel to Frame Bolts | 29 N.m | 21 lb ft |
| Wheelhouse Panel to Radiator Support Bolts | 29 N.m | 21 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.