Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 926 (ENGINE COOLING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Coolant Recovery Reservoir Nuts | 8-11 N.m | 6-8 lb ft |
| Engine Coolant Heater Cord Bolt | 8 N.m | 71 lb in |
| Engine Coolant Heater Mounting Screw | 1.9 N.m | 17 lb in |
| Engine Oil Cooler Line Clamp Bolt | 10 N.m | 89 lb in |
| Engine Oil Cooler Line to Adapter Bolt | 35 N.m | 26 lb ft |
| Engine Oil Cooler Line to Radiator Connectors | 31 N.m | 23 lb ft |
| Engine Oil Cooler Lines to Oil Filter Adapter Retaining Bolt | 35 N.m | 26 lb ft |
| Fan Clutch Assembly Nut to Water Pump Pulley Stud | 56 N.m | 40 lb ft |
| Fan Clutch Mounting Bolts | 33 N.m | 24 lb ft |
| Fan Shroud Bolts | 10 N.m | 89 lb in |
| Intake Air Duct Clamp | 5 N.m | 44 lb in |
| Remote Filter Housing Bracket to Radiator Core Support | 30 N.m | 22 lb ft |
| Remote Filter Housing to Bracket Nuts | 25 N.m | 18 lb ft |
| Steering Linkage Shield Bolts | 32 N.m | 24 lb ft |
| Throttle Body Bracket Nuts | 10 N.m | 89 lb in |
| Water Outlet Housing Bolt 2.2 L | 10 N.m | 89 in lb |
| Water Outlet Housing Bolts 4.3 L | 19 N.m | 14 lb ft |
| Water Pump Bolt 2.2L | 25 N.m | 18 lb ft |
| Water Pump Bolt and Stud 4.3L | 41 N.m | 30 lb ft |
| Water Pump Pulley Bolts | 25 N.m | 18 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.