SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 879 (ANTILOCK BRAKE SYSTEM)SPECIFICATIONS
2004 Oldsmobile Bravada RWD

Section 879 (Antilock Brake System): Specifications

2004 Oldsmobile Bravada RWDSECTION Specifications
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Torque Specifications

Application Specification
Metric English
Brake Pipe Fittings at Brake Pressure Modulator Valve (BPMV) and Master Cylinder 24 N.m 18 lb ft
Brake Pressure Modulator Valve (BPMV) and Electronic Brake Control Module (EBCM) Assembly to Mounting Bracket 10 N.m 89 lb in
Electronic Brake Control Module (EBCM) to Brake Pressure Modulator Valve (BPMV) 5 N.m 44 lb in
Master Cylinder to Brake Booster Studs 25 N.m 18 lb in
Mounting Bracket Nut/Bolt Assembly to Shock Tower 10 N.m 89 lb in
Switch Bank Nuts/Bolts 2.5 N.m 22 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.