Torque Specifications

2004 Oldsmobile Bravada RWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2002 GMC Sonoma, 2002 GMC Jimmy, 2002 Chevrolet S10 Pickup, and 2002 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Filler Tube Bolt 35 (47)
Oil Pan Drain Plug 13 (18)
PNP Switch Bolt 18 (24)
Transmission Control Lever Nut 18 (24)
INCH Lbs. (N.m) 
Accumulator-To-Case Bolt 97 (11)
Manual Detent Spring Bolt 97 (11)
Oil Cooler Line Bolt 97 (11)
Oil Pan Bolt 97 (11)
Oil Pass Cover Bolt 97 (11)
Pressure Control Solenoid Bolt 97 (11)
TCC Solenoid Bolt 97 (11)
Transmission Fluid Indicator Stop Bolt 97 (11)
Valve Body-To-Case Bolt (1) 97 (11)
VSS Bolt 97 (11)
(1) Tighten valve body bolts in a spiral pattern starting in center of valve body.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.