Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSOLDSMOBILE2004BRAVADA RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 844 (BODY FRONT END)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2004 Oldsmobile Bravada RWD
Fastener Tightening Specifications
2004 Oldsmobile Bravada RWDSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Inlet Grille Panel Screws | 2 N.m | 18 lb in |
| Battery Tray Bolts | 9 N.m | 80 lb in |
| Cab Mount Bolts | 75 N.m | 55 lb ft |
| Cable Handle Nut | 11 N.m | 97 lb in |
| Condenser Mounting Bolts | 9 N.m | 80 lb in |
| Diagonal Brace Bolts | 25 N.m | 18 lb ft |
| Fender Bolts | 25 N.m | 18 lb ft |
| Fender to Cowl Support Brace Bolts | 9 N.m | 80 lb in |
| Fender to Door Hinge Bolts | 25 N.m | 18 lb ft |
| Fender to Radiator Support Bolts | 25 N.m | 18 lb ft |
| Fender to Upper Cowl Bracket Bolts | 25 N.m | 18 lb ft |
| Ground Strap Nut | 9 N.m | 80 lb in |
| Headlamp Housing Screws | 9 N.m | 80 lb in |
| Hinge to Fender Bracket Bolt | 25 N.m | 18 lb ft |
| Hood Hinge Bolts | 25 N.m | 18 lb ft |
| Hood Latch Bolts | 9 N.m | 80 lb in |
| Hood Spring Bolts | 25 N.m | 18 lb ft |
| Link Assembly Bolts | 25 N.m | 18 lb ft |
| Lower Fender Bolts | 25 N.m | 18 lb ft |
| Pickup Box to Frame Rail Bolts | 70 N.m | 52 lb ft |
| Pivot Bolt | 25 N.m | 18 lb ft |
| Radiator Support to Frame Mounting Nut | 70 N.m | 52 lb ft |
| Upper Radiator Support Bolts | 9 N.m | 80 lb in |
| Washer Reservoir Bolt | 9 N.m | 80 lb in |
| Wheelhouse Panel Bracket Bolts | 9 N.m | 80 lb in |
| Wheelhouse Panel Bracket Nuts | 25 N.m | 18 lb ft |
| Wheelhouse Panel to Dash Panel Bolt | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.