Service Specifications

2004 Oldsmobile Bravada RWDSECTION Service Specifications
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
A/C SYSTEM SPECIFICATIONS

Application Specification
Compressor Type ATMOS GU10
Compressor Magnetic Clutch Air Gap 0.014-0.029" (0.35-0.75 mm)
Compressor Oil Capacity 5.24 Ozs.
Magnetic Clutch Gap 0.012-0.019" (0.30-0.50 mm)
Pressure Relief Valve (1)
Refrigerant (R-134a) Capacity 16.8-18.5 ozs.
Refrigerant Pressure Switch
On
Low Side 25.53-36.31 psi (176-250 kPa)
High Side 57-114 psi (393-786 kPa)
Off
Low Side 25.53-31.31 psi (176-216 kPa)
High Side 427-463 psi (2944-3192 kPa)
System Oil Capacity (1)
System Operating Pressures (2)
High Side 180-264 psi (1241-1820 kPa)
Low Side 12-23 psi (83-159 kPa)
(1) Information not available from manufacturer.
(2) Specification is with ambient temperature at 86°F (30°C) and engine speed at 1500 RPM. Specifications are approximate.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.